7 Common Hydraulic Cylinder Failures and How to Prevent Them

To lift, press, and move large objects, hydraulic cylinders are employed in numerous equipment. They work hard every day, so it's typical for them to get worn out over time. But if you know what to look for, you may prevent a lot of difficulties. If you don't handle a tiny problem right away, it might turn into a large one. That's why it's necessary to take care of things and inspect them often. Your equipment will stay running without any problems if you use good components from well-known firms like Dynamic Hydrofab. Let's talk about the most common reasons why hydraulic cylinders break and how to stop them before they do any damage.

Fluid Contamination

If dirt or water gets into the hydraulic fluid, it might damage the parts inside the cylinder. Fluid that is dirty can scrape surfaces and make the cylinder not operate well.
 Always use clean fluid and check the filters periodically to avoid this. In order to keep the fluid clean and safeguard the cylinder, good hydraulic cylinder manufacturers in India employ superior seals and filters.

Seal Failure

The seals protect the fluid from leaking out of the cylinder. If they break or wear out, the fluid might leak, and the machine could not work. This normally develops over time or when you use the improper seal.
During regular maintenance, make sure to check the seals. Dynamic Hydrofab employs powerful, long-lasting seals that keep your equipment working smoothly and help stop leaks.

Mount Connection Failure

The cylinder might wobble or bend if it isn't fastened to the machine correctly. This puts more stress on the parts, which might cause them to fracture or shatter.
To avoid this, ensure sure the cylinder is put together correctly and all the pieces are tight. These problems may be avoided with good design from leading hydraulic cylinder manufacturers.

Side Loading

Pushing the cylinder at an angle, not straight, might break the rod or bend the cylinder. This is known as side loading.
Put the cylinder in the right position for its movement and support it well. Dynamic Hydrofab makes cylinders that move better and don't put as much stress on the sides.

Extreme Temperatures

The cylinder might be affected by very hot or very cold temperatures. Cold may slow down the flow of fluids, and heat can break seals.
Choose the correct fluid for the job. Some Hydraulic Cylinders in India are designed to operate without any problems in extremely cold or hot conditions.

Over-pressurizing

Putting too much pressure on the cylinder might break its components. It might shatter the cylinder or create leakage.
Always stay within the machine's pressure restrictions. Dynamic Hydrofab makes sturdy cylinders that can bear pressure securely.

Corrosion

Moisture or chemicals can induce rust, which can make the cylinder weaker and lead it to fail.
Make sure the cylinders are clean and dry. For a longer life, several hydraulic cylinder manufacturers provide variants that won't rust.

Conclusion

In order to survive a long time, hydraulic cylinders require maintenance. Using clean fluid, inspecting seals, and not putting too much pressure on things are all little things you can do that can make a great impact. Dynamic Hydrofab makes high-quality products that make your life safer, stronger, and smoother every day.

Also Read:- Hydraulic Cylinder Pressure Testing: Ensuring Safety & Performance

Also Read:- Why Choose Quality Hydraulic Cylinders for Tractor Loaders?